Solar water heating technology is fast emerging as the most energy -efficient and inexpensive method of water heating and perhaps the only solution to today’s challenge of increasing energy costs, rising pollution levels and rapidly depleting energy sources.
With cost and energy savings like never before, Mayu solar water heating systems address heating requirements for varying family sizes, climatic conditions & building types.
Mayu solar water heaters work on thermosiphon principle, a highly trusted and efficient system of water heating. Based on phenomenon of natural convection, water stored in the collector heats up by solar energy, becomes lighter and rises naturally into the tank above. At the same time the cooler water in the tank flows down the pipe to bottom of the collector, and this circulation continues to occur naturally, resulting in overall temperature rise of water stored in the tank. Through the thermosiphon principle the fluid circulates without the necessity of a mechanical pump.
Flat plate pressurized solar water heater is such a kind of thermosiphon solar water heating device with flat plate collector placed below high pressure hot water tank. The tank and flat plate are connected with circulation pipes to form an closed-loop solar water heating system, the household water is heated directly inside flat panel collector and rise to be stored inside hot water tank.
Flat plate solar collector is a metal box with a glass cover on top and a colored absorber plate at the middle. The sides and bottom of the collector are usually insulated to minimize heat loss. Sunlight passes through the glazing and strikes the absorber plate, which heats up, changing solar energy into heat energy. The heat is transferred to the liquid passing through pipes attached to the absorber plate.
• Inner tank: Stainless steel, 1.2mm thickness.
• Outer tank: Color steel, 0.4mm thickness.
• Working pressure: ≤ 6 Bar
• Insulation layer: PU foam, density: 42 kg/m3, thickness: 55mm
• Dimension LXWXH (mm): 2000x1250x80
• Gross Area (m2): 2.5
• Apertutre Area (m2): 2.29
• Number of cover (pcs): 1
• Cover Thickness (mm): 3.2
• Cover material: Low iron, super clear, Fabric surface tampered glass
• Cover Transmission: >93%
• Support: Painted galvanized steel